Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!

They will work for most 1/8" materials. They are NOT recommended for 1/4" materials, unless you make a hole large enough for the clip to feed through the material. 

**Please note: these are slightly different in appearance compared to the OG clear 1/8” Keychain Thingies®! They have two small holes, as shown in the listing photos. Unlike the OGs, the Xtra Strength have a PERMANENT closure (ask me how I know 😂) so if you need a stronger hold - these are the ones you want!

When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with a FREE keychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.

*Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands. 

Insurance and Priority Shipping upgrades are available.

Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery. 

Specifications

• 3mm (1/8") Thickness
• B/BB Grade Baltic Birch Plywood
• Veneer Core
• Birch Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!

They will work for most 1/8" materials. They are NOT recommended for 1/4" materials, unless you make a hole large enough for the clip to feed through the material. 

When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with a FREE keychain file! Email Crystal@RileyBlackDesigns.com to claim your file.

*Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands. 

Insurance and Priority Shipping upgrades are available.

Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery. 

Specifications

• 1/8" (3mm) Thickness
• MDF

MDF sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting.  Store sheets flat with weight on top to avoid warping.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/8" (3.2mm) Thickness
• Basswood Core
• Maple Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 3mm (1/8") Thickness
• Prefinished on Both Sides
• B/BB Grade Baltic Birch Plywood
• Veneer Core
• Birch Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 6mm (1/4") Thickness
• B/BB Grade Baltic Birch Plywood
• Veneer Core
• Birch Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x19, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!

These will work for materials up to approx .18-19”! They will also work for 1/8” materials, but there will be a small gap/movement. They may not fit thicker materials near a true 1/4”. 

When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with a FREE keychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.

**Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.

Insurance and Priority Shipping upgrades are available. 

Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery. 

Specifications

• 1/8" (3.2mm) Thickness
• Basswood Core
• Cherry Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/8" (3.2mm) Thickness
• Basswood Core
• Walnut Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/4" (5.2mm) Thickness
• Basswood Core
• Maple Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/4" (5.2mm) Thickness
• MDF

MDF sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting.  Store sheets flat with weight on top to avoid warping.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/8" (3.2mm) Thickness
• Finished on Both Sides
• Wood Core
• Walnut Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/4" (5.2mm) Thickness
• Basswood Core
• Cherry Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Not sure which wood you want? Want to try all the Products? Well we have great news! Its our sample pack! Comes in different sizes. 

Woods Species included : Birch, Walnut, Cherry, Maple, Hickory, Sapele, White Oak, Mahogany, Red Oak, White Birch, Aromatic Cedar, Alder and Poplar

The sample pack will have 1 sided clear coat and 1 side being raw being 1/8" thick. (Birch is not clear coated)

Specifications

• 1/4" (5.2mm) Thickness
• Basswood Core
• Walnut Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/8" (3.2mm) Thickness
• Basswood Core
• Sapele Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

How to make an engraved bangle bracelet:

• Step 1: Engrave or handstamp one or both sides
• Step 2: Use a bracelet bender from Monarch Pine to form into a bangle shape
• Step 3: Use bracelet pliers from Monarch Pine for any finishing touches for a perfect shape

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold, rose gold, or black plated
• Material: Stainless steel (mirror polish on one side and brushed finish on the other side)
• Size: 6 inches long by .25 inches wide
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 bracelet total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both front and back for a super-special end product

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Sizes 6-10 available in the drop-down menu; roughly 7mm heart
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 ring total
• Wear as is or engrave with a laser (such as a fiber, infrared, or UV laser) or handstamp; please note that CO2 and diode lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)

Specifications

• 1/4" (5.2mm) Thickness
• Basswood Core
• Sapele Veneer on Both Sides

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

Specifications

• 1/8" (3.2mm) Thickness
• Basswood Core
• Aromatic Cedar Veneer on Both Sides

Aromatic Cedar can have open knots and many variations on each side which are natural characteristics of the species.

Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.

We use this material in our laser shop every day.  We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.

Due to increased demand, we have expanded into a variety of sizes.  These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec.  Please contact us for other size requests.

Processing & Shipping

• All prepacks ship free
• All 12" x 19" prepacks ship out same or next day
• All other size prepacks ship out in 1-3 days

Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.

Custom or Bulk Orders
Please contact us at contact@creativecutsupplies.com for any custom or bulk order requests.

Bunk Shipments
We ship full and partial bunks across the country.  Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.

18 pack of 1/16", 1/8" or 1/4" x 11.7/8" x 19 7/8" 2 Sided Cherry, Maple and Walnut Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry. (Note: No Clear Coat or Masking)

PACK INCLUDES

6 - CHERRY

6 - MAPLE

6 - WALNUT

1/16" x 11.75" x 19.2" 2 Sided Birch Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry.

THIS IS A BULK PACK OF 20