Silver Mirror Acrylic Sheet
BRAND: Custom Made Better
⋆ CLARITY: Mirror
⋆ MASKED: Yes, Thin Clear
⋆ LASER SAFE: Yes
⋆ C/E: Cast
Our Acrylic & Acetate sheets are perfect for use in your laser cutting and engraving machines, CNC Routing machines, Glow Forge, Aeon, Mira, Flux Beamo, and more! These Acetate/Acrylic Sheet sheets open up a ton of possibilities for every crafter and laser cutter. Create wall decor, jewelry, business signs, trinket boxes, jewelry displays, keychains and more!
CUTTING TIPS & TRICKS
★ Our mirror acrylic is covered with a simple clear plastic protective mask. While you technically *can* cut through it we recommend removing this and brushing on a thin coat of Dawn dish soap (a flame reducing and protective agent that reduces flash back and covers better than paper masking) on both sides before cutting. You do not need to let this fully dry before placing it in your bed, and it washes off clean for a perfect finish.
★ The reflective properties of a mirrored acrylic make this acrylic more prone to flashback, you usually want to cut this with the shiny side down and the grey back facing up. This way the reflective surface is not shining up towards the laser. Using the dish soap can reduce this, we've had success cutting and engraving face up but as a general practice, it's recommended to cut face down.
★ Get the most out of your engraving on our mirrored acrylic by flipping your image horizontally (or "mirroring" it) in your software before etching on the BACK of your acrylic. This way you are etching away the solid back of the sheet allowing more light to come through!
★ Mirrored acrylic is an extruded acrylic, making it more durable than cast and can actually be polished. Extruded acrylic will have a stronger smell when being laser cut compared to our cast acrylic; this can be reduced when using the Dawn dish soap as a mask alternative, however, we recommend those with smell sensitivities to mind this when cutting in small spaces.
★ Always run a test cut! Like, seriously, we're all human and things happen. Our machines are all different by design and are all in different conditions. Don't be afraid to tinker around and learn your machine through trial and error on a small scale before diving in!
★ Before cutting, run your checks! A clean machine is a happy machine, and a happy machine means a better cut on the first go! 😉
- Lense - Any debris here can cause you to lose focus or power, check this every time.
- Mirrors - This will vary by make and model, take the time to get familiar with yours and how often you need to check them. This can range from monthly to semi-annually.
- Work Area/Bed - Yeeeesh, these can get dirty depending on what you're cutting on a regular basis. This is definitely an "as needed" type of clean, we recommend minding the instructions based on your machine's make and model.
- Crumb Tray - Another "as needed" type of clean, and surely one of the more tedious tasks. Because of that, we recommend cleaning often simply to reduce the amount of work needed to actually get it clean!
GLOWFORGE CUT SETTINGS
All of our mirrored acrylic can be cut on PG Medium, selecting either Red (warmer colors), Blue (cooler colors), or Black (darker colors or deeper hues) to match the color you are cutting.
Sizes with a 24" width will have a flat $10 shipping fee at checkout, all other smaller sizes will ship FREE with $65!
Please note that due to the cutting process, sheet actual measurements may vary up to 1/4" depending on the type of acrylic and blades used to cut down the sheets.