Triangle linking rings are the perfect connectors for your DIY jewelry. Use for fringe, to connect multi-piece earrings, and more! Made from stainless steel, these high-quality closed rings are hypoallergenic and tarnish-resistant. With a 20x23 millimeter size, these connectors are versatile to pair with metal, acrylic, leather, wood, and more. This listing is for 10 individual pieces (5 pairs).

(For fabulous leather fringe earrings, simply attach an ear wire at the top of the ring and tie thin leather strips at the bottom using lark's knots!)

-----------------
DETAILS
-----------------
• Color: Golden
• Material: Stainless steel
• Size: 20x23mm
• Quantity: 10 pieces (5 pairs)
• Coordinate with matching our jump rings and ear wires (not included)
• Perfect to pair with leather, resin, wood, metal, etc.

All new 100% stainless steel hardware! The hardware is all stainless steel, including the dome. The posts are 316l surgical stainless steel and are very sturdy and durable.

** Since this is a woven stud, I'll ship these to you in a box. It's highly recommended to ship these to your own customers in a protective box instead of a poly mailer. **

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Light natural
• Material: Raffia, 316l surgical stainless steel earring post, stainless steel base (100% stainless steel hardware), Woven Rattan Boho Connector
• Shape: Rounded dome
• Size: 14mm diameter (size small/petite -- wearable and versatile for almost everyone!)
• Quantity: 1 pair
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

This listing is for 2 individual pieces (1 pair). 

-----------------
DETAILS
-----------------
• Color: All black
• Material: Stainless steel (mirror polished AKA super shiny finish) bar 
• Size: Approximately 7.5" bracelet diameter plus a 2-inch attached extender; lobster clasp closure 
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 bracelet total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)

-----------------
DETAILS
-----------------
• Color: Stainless steel color
• Material: Surgical stainless steel, hoop part is 1.2mm thick (perfect for beads and glitter/rhinestone cord!)
• Hoop Diameter: 50mm
• Quantity: 10 pieces
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)

How to make an engraved bangle bracelet:

• Step 1: Engrave or handstamp one or both sides
• Step 2: Use a bracelet bender from Monarch Pine to form into a bangle shape
• Step 3: Use bracelet pliers from Monarch Pine for any finishing touches for a perfect shape

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated
• Material: Stainless steel (brushed finish)
• Size: 6.3 inches long by .25 inches wide with heart-shaped hole on each end
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 bracelet total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both front and back for a super-special end product

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color)
• Material: Stainless steel (brushed finish)
• Size: Roughly 16mm on the longest side, 6mm wide, 2mm inner hole diameter 
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 5 charms (plus attached jump rings)

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color)
• Material: Stainless steel (polished finish)
• Size: 52mm x 20mm (0.8mm thick)
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 piece

All new 100% stainless steel hardware! The hardware is all stainless steel, including the dome. The posts are 316l surgical stainless steel and feature a wider flat pad base (see the 2nd listing photo for an example of the new post/dome style), which makes these very sturdy and durable. Each pair comes carefully packaged on an earring card in its own cello bag. Bullet clutch backs are included on the earrings, along with an extra free set of backs with each pair.

** Since this is a beaded item, I'll ship these to you in a box. It's highly recommended to ship seed bead earrings to your own customers in a protective box instead of a poly mailer. **

-----------------
DETAILS
-----------------
• Color: Spring green
• Material: Seed beads, 316l surgical stainless steel earring post, stainless steel base (100% stainless steel hardware)
• Shape: Round (pom style)
• Size: 15mm diameter (size small/petite -- wearable and versatile for almost everyone!)
• Quantity: 1 pair
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

Seed bead stud toppers are perfect to pair with team earrings, acrylic, wood, leather, and more! Use them alone, or simply link a jump ring through the hole in the beading dome that lines up with the post. This listing is for 2 individual pieces (1 pair).

100% stainless steel hardware! The hardware is all stainless steel, including the dome. The posts are 316l surgical stainless steel and feature a wider flat pad base (see the 2nd listing photo for an example of the new post/dome style), which makes these very sturdy and durable. Each pair comes carefully packaged on an earring card in its own cello bag. Bullet clutch backs are included on the earrings, along with an extra free set of backs with each pair.

** Since this is a beaded item, I'll ship these to you in a box. It's highly recommended to ship seed bead earrings to your own customers in a protective box instead of a poly mailer. **


-----------------
DETAILS
-----------------
• Color: Wisteria purple (pretty close to our light purple seed bead toppers)
• Material: Seed beads, 316l surgical stainless steel earring post, stainless steel base (100% stainless steel hardware)
• Shape: Round (pom style)
• Size: 15mm diameter (size small/petite -- wearable and versatile for almost everyone!)
• Quantity: 1 pair
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

Seed bead stud toppers are perfect to pair with team earrings, acrylic, wood, leather, and more! Use them alone, or simply link a jump ring through the hole in the beading dome that lines up with the post. This listing is for 2 individual pieces (1 pair).

-----------------
DETAILS
-----------------
• Color: Choose from light orange, light salmon pink, cherry red, sky blue, turquoise, kelly green, emerald green, rainbow mix, caramel brown, or jet black 
• Size: Roughly 40mm (they're hand-woven and will slightly in size from one piece to another)
• Quantity: 4 pieces
• Please note: Unlike acrylic faux rattan, real rattan is hand-woven, meaning that one piece will not be an exact match to another, so these will be sold in sets of 4 pieces so you can match up sizes to one another to your liking (they're roughly 35mm).

Triangle linking rings by Monarch Pine Craft Supply are the perfect connectors for your DIY jewelry. Use for fringe, to connect multi-piece earrings, and more! Made from stainless steel, these high-quality closed rings are hypoallergenic and tarnish-resistant. With a 20x23 millimeter size, these connectors are versatile to pair with metal, acrylic, leather, wood, and more. This listing is for 10 individual pieces (5 pairs).

(For fabulous leather fringe earrings, simply attach an ear wire at the top of the ring and tie thin leather strips at the bottom using lark's knots!)

-----------------
DETAILS
-----------------
• Color: Stainless steel color
• Material: Stainless steel
• Size: 20x23mm
• Quantity: 10 pieces (5 pairs)
• Coordinate with matching Monarch Pine jump rings and ear wires (not included)
• Perfect to pair with leather, resin, wood, metal, etc.

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Sizes 6-10 available in the drop-down menu; roughly 13x10mm oval 
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 ring total
• Wear as is or engrave with a laser (such as a fiber, infrared, or UV laser) or handstamp; please note that CO2 and diode lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)

These gorgeous Monarch Pine jump rings are sturdy and will match your other findings from my shop perfectly! These jump rings are hypoallergenic, tarnish-resistant, and an overall excellent quality.

-----------------
DETAILS
-----------------
• Color: Rainbow
• Material: Surgical stainless steel
• Size: 10mm x 1mm (18 gauge), closed but unsoldered
• Quantity: 100 pieces
• Coordinate with matching jump rings and ear wires by Monarch Pine (not included)
• Perfect to pair with leather, resin, wood, metal, etc.

Forward-facing ear wires from Monarch Pine Craft Supply are the perfect choice for makers who are tired of using pliers to turn the loops on ear wires. Crafted from from premium hypoallergenic surgical stainless steel, these gold-toned perpendicular earring hooks are tarnish resistant, sturdy, and feature a 2.5 millimeter loop. Quantity: 20 pieces (10 pairs)


-----------------
DETAILS
-----------------
• Color: Gold
• Material: surgical surgical stainless steel
• Inner Eye: 2.5mm
• Quantity: 20 pieces (10 pairs)
• Forward-facing loop
• Tarnish resistant
• Hypoallergenic for most people

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated 
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.5 inches long and bar is roughly 35mmx6mm
• Lobster clasp closure
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Natural (light wood)
• Material: Wood stud / stainless steel post
• Shape: Tall trapezoid (angular rounded corners)
• Size: 14x12mm
• Quantity: 10 pieces
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

-----------------
DETAILS
-----------------
Discover the convenience of our beading mats and wonder how you ever managed without them. If you're already familiar with these mats, you know they provide a cost-effective solution to the constant struggle of runaway beads. Those tiny beads often have a mind of their own, rolling and bouncing off the table, seemingly never to be seen again. It's incredibly frustrating when you're deep into your project and a bead escapes your grasp. Who knew this problem could be solved so quickly, easily, and inexpensively?

Adding a large bead mat to your workspace provides a soft, secure place for your beads to rest until you need them. These soft mats are perfect for organizing, visualizing, and sorting your beads. When you're ready to move to bead weaving or jewelry making, you can slide the entire mat aside without disrupting your layout. Slide it back into place when you're ready to work again, and everything will be exactly where you left it. When you're done, simply roll the mat up and tuck it away with your supplies until you're ready to bead again.

Use one to keep beads and tools on a big workspace and cut the other foam-like mats to accommodate smaller projects or work areas. Store your half-finished bracelet or necklace on them, tuck one under your loom to catch rogue beads, or use them as liners in storage containers. The possibilities are endless, limited only by your imagination.

*** Purchase a bracelet chain with 3 heart charms on the bracelet or a set of 5 extra hearts; select from the drop-down menu below

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 45mm long and has a 2 inch extender, hearts are roughly 18mmx16mm; or purchase a set of 5 extra hearts (size is also 18mmx16mm)
• Lobster clasp closure, also has extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both front and back for a super-special end product

-----------------
DETAILS
-----------------
• Color: Gold
• Material: Brass
• Size: 35mm diameter
• Quantity: 10 pieces
• Coordinate with matching Monarch Pine Craft Supply jump rings and ear wires (not included)
• Perfect to pair with leather, resin, wood, metal, etc.

These premium Monarch Pine Craft Supply jump rings are easier to use and just as durable as ever. Unlike our previous closed-but-unsoldered style, these are pre-opened so you can simply close them securely—saving you time and effort. They’re sturdy, high-quality stainless steel with a beautiful PVD gold coating that’s hypoallergenic for most people, tarnish-resistant, and built to last. Once closed, they’ll hold tight through everyday wear.

For best results, we recommend closing with two pairs of jewelry pliers or one pair of pliers and a jump ring ring. They’ll coordinate perfectly with our other gold findings, so your pieces have a seamless, professional finish.

-----------------
DETAILS
-----------------
• Color: Gold
• Finish: PVD coated for durability and long-lasting color
• Material: Surgical stainless steel
• Size: 7mm (18 gauge)
• Quantity: 100 pieces
• Style: Open (ready to close)
• Hypoallergenic for most people
• Tarnish-resistant, nonfading
• Coordinates with matching Monarch Pine findings (sold separately)
• Great for connecting charms, pendants, clasps, chains, and other jewelry components
• Works beautifully with leather, resin, wood, metal, acrylic, and more

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold, or rose gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long and heart is roughly 8mm in diameter
• Lobster clasp closure
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plating 
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.5 inches long (plus a 2 inch long extender), heart is 16mm, and outer circle has a 30mm diameter
• Lobster clasp closure, includes necklace extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel) or Gold (PVD-coated stainless steel)
• Material: Surgical stainless steel, which is tarnish-resistant, nonfading, and hypoallergenic for most people
• Length: 45cm necklace necklace, plus a 2-inch attached extender 
• Link Size: 1.5mm cable chain links 
• Quantity: 5 necklace chains
• Closure: Lobster clasp and jump ring
• Uses: Perfect for charm bars, attaching a focal charm, or pairing with engravable metal blanks

-----------------
DETAILS
-----------------
• Color: Choice of silver or gold 
• Material: Stainless steel (stainless steel color or gold-plated stainless steel, shiny finish)
• Size: Approximately 0.75" long, 1 connector hole (great for necklaces)
• Quantity: 10 pieces 
• Perfect to pair with Monarch Pine chains and findings 

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) or gold
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is about 20mm on the longest side 
• Lobster clasp closure plus attached 2 inch extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

These premium Monarch Pine Craft Supply jump rings are easier to use and just as durable as ever. Unlike our previous closed-but-unsoldered style, these are pre-opened so you can simply close them securely—saving you time and effort. They’re sturdy, high-quality stainless steel with a shiny steel-color silver finish that’s hypoallergenic for most people, tarnish-resistant, and nonfading. Once closed, they’ll hold tight through everyday wear.

For best results, we recommend closing with two pairs of jewelry pliers or one pair of pliers and a jump ring ring. They’ll coordinate perfectly with our other silver findings, so your pieces have a seamless, professional finish.

-----------------
DETAILS
-----------------
• Color: Silver (shiny steel color)
• Finish: Unplated stainless steel
• Material: Surgical stainless steel
• Size: 12mm (16 gauge)
• Quantity: 100 pieces
• Style: Open (ready to close)
• Hypoallergenic for most people
• Tarnish-resistant, nonfading
• Coordinates with matching Monarch Pine findings (sold separately)
• Great for connecting charms, pendants, clasps, chains, and other jewelry components
• Works beautifully with leather, resin, wood, metal, acrylic, and more

*** Purchase a chain with a disc already attached or a set of 5 discs (jump rings already attached), select from the menu above.

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold or rose gold plating
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 45cm long (plus a roughly 2 inch long extender) and attached disc is roughly 6mm in diameter, optional extra discs are also 6mm diameter and have jump rings already attached (sold in sets of 5 discs)
• Lobster clasp closure, includes necklace extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

If you hate dealing with jump rings for your keychain designs, then Keychain Thingies® are *perfect* for you! Get ready to transform and streamline your keychain assembly with these sleek and easy-to-use clips.

Keychain Thingies® are the ultimate timesavers for keychain making, and XL will work with up to approximately .18" - .19”, including acrylic, wood, leather, and more! They will also work for 1/8” materials, but there will be a small gap/movement. They may not fit thicker materials near a true 1/4”. Please use digital calipers to measure your material.

When creating your keychain files, it's recommended to use a .19" size hole with a .125" offset. Recommended material thickness is 1/8" (or 2.2mm - 3mm).

*** This listing is for 100 clear pieces.

-----------------
DETAILS
-----------------
• Color: Clear
• Quantity: 100 pieces
• Pair with your favorite keychain material, along with Monarch Pine split rings and lobster swivel clasps!
• Perfect to pair with acrylic, wood, leather, and more!

-----------------
DETAILS
-----------------
• Color: Silver
• Material: Brass
• Size: 21x12mm, 2 holes
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with polymer clay, leather, cork, resin, wood, metal, etc.

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) or gold
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is about 0.75" on the longest side 
• Lobster clasp closure plus attached 2 inch extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product