-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated 
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.5 inches long and bar is roughly 35mmx6mm
• Lobster clasp closure
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Natural (light wood)
• Material: Wood stud / stainless steel post
• Shape: Tall trapezoid (angular rounded corners)
• Size: 14x12mm
• Quantity: 10 pieces
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

-----------------
DETAILS
-----------------
Discover the convenience of our beading mats and wonder how you ever managed without them. If you're already familiar with these mats, you know they provide a cost-effective solution to the constant struggle of runaway beads. Those tiny beads often have a mind of their own, rolling and bouncing off the table, seemingly never to be seen again. It's incredibly frustrating when you're deep into your project and a bead escapes your grasp. Who knew this problem could be solved so quickly, easily, and inexpensively?

Adding a large bead mat to your workspace provides a soft, secure place for your beads to rest until you need them. These soft mats are perfect for organizing, visualizing, and sorting your beads. When you're ready to move to bead weaving or jewelry making, you can slide the entire mat aside without disrupting your layout. Slide it back into place when you're ready to work again, and everything will be exactly where you left it. When you're done, simply roll the mat up and tuck it away with your supplies until you're ready to bead again.

Use one to keep beads and tools on a big workspace and cut the other foam-like mats to accommodate smaller projects or work areas. Store your half-finished bracelet or necklace on them, tuck one under your loom to catch rogue beads, or use them as liners in storage containers. The possibilities are endless, limited only by your imagination.

*** Purchase a bracelet chain with 3 heart charms on the bracelet or a set of 5 extra hearts; select from the drop-down menu below

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 45mm long and has a 2 inch extender, hearts are roughly 18mmx16mm; or purchase a set of 5 extra hearts (size is also 18mmx16mm)
• Lobster clasp closure, also has extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both front and back for a super-special end product

-----------------
DETAILS
-----------------
• Color: Gold
• Material: Brass
• Size: 35mm diameter
• Quantity: 10 pieces
• Coordinate with matching Monarch Pine Craft Supply jump rings and ear wires (not included)
• Perfect to pair with leather, resin, wood, metal, etc.

These premium Monarch Pine Craft Supply jump rings are easier to use and just as durable as ever. Unlike our previous closed-but-unsoldered style, these are pre-opened so you can simply close them securely—saving you time and effort. They’re sturdy, high-quality stainless steel with a beautiful PVD gold coating that’s hypoallergenic for most people, tarnish-resistant, and built to last. Once closed, they’ll hold tight through everyday wear.

For best results, we recommend closing with two pairs of jewelry pliers or one pair of pliers and a jump ring ring. They’ll coordinate perfectly with our other gold findings, so your pieces have a seamless, professional finish.

-----------------
DETAILS
-----------------
• Color: Gold
• Finish: PVD coated for durability and long-lasting color
• Material: Surgical stainless steel
• Size: 7mm (18 gauge)
• Quantity: 100 pieces
• Style: Open (ready to close)
• Hypoallergenic for most people
• Tarnish-resistant, nonfading
• Coordinates with matching Monarch Pine findings (sold separately)
• Great for connecting charms, pendants, clasps, chains, and other jewelry components
• Works beautifully with leather, resin, wood, metal, acrylic, and more

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold, or rose gold plated
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long and heart is roughly 8mm in diameter
• Lobster clasp closure
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold plating 
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.5 inches long (plus a 2 inch long extender), heart is 16mm, and outer circle has a 30mm diameter
• Lobster clasp closure, includes necklace extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel) or Gold (PVD-coated stainless steel)
• Material: Surgical stainless steel, which is tarnish-resistant, nonfading, and hypoallergenic for most people
• Length: 45cm necklace necklace, plus a 2-inch attached extender 
• Link Size: 1.5mm cable chain links 
• Quantity: 5 necklace chains
• Closure: Lobster clasp and jump ring
• Uses: Perfect for charm bars, attaching a focal charm, or pairing with engravable metal blanks

-----------------
DETAILS
-----------------
• Color: Choice of silver or gold 
• Material: Stainless steel (stainless steel color or gold-plated stainless steel, shiny finish)
• Size: Approximately 0.75" long, 1 connector hole (great for necklaces)
• Quantity: 10 pieces 
• Perfect to pair with Monarch Pine chains and findings 

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) or gold
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is about 20mm on the longest side 
• Lobster clasp closure plus attached 2 inch extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

These premium Monarch Pine Craft Supply jump rings are easier to use and just as durable as ever. Unlike our previous closed-but-unsoldered style, these are pre-opened so you can simply close them securely—saving you time and effort. They’re sturdy, high-quality stainless steel with a shiny steel-color silver finish that’s hypoallergenic for most people, tarnish-resistant, and nonfading. Once closed, they’ll hold tight through everyday wear.

For best results, we recommend closing with two pairs of jewelry pliers or one pair of pliers and a jump ring ring. They’ll coordinate perfectly with our other silver findings, so your pieces have a seamless, professional finish.

-----------------
DETAILS
-----------------
• Color: Silver (shiny steel color)
• Finish: Unplated stainless steel
• Material: Surgical stainless steel
• Size: 12mm (16 gauge)
• Quantity: 100 pieces
• Style: Open (ready to close)
• Hypoallergenic for most people
• Tarnish-resistant, nonfading
• Coordinates with matching Monarch Pine findings (sold separately)
• Great for connecting charms, pendants, clasps, chains, and other jewelry components
• Works beautifully with leather, resin, wood, metal, acrylic, and more

*** Purchase a chain with a disc already attached or a set of 5 discs (jump rings already attached), select from the menu above.

-----------------
DETAILS
-----------------
• Color: Choose silver (stainless steel color) or gold or rose gold plating
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 45cm long (plus a roughly 2 inch long extender) and attached disc is roughly 6mm in diameter, optional extra discs are also 6mm diameter and have jump rings already attached (sold in sets of 5 discs)
• Lobster clasp closure, includes necklace extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

If you hate dealing with jump rings for your keychain designs, then Keychain Thingies® are *perfect* for you! Get ready to transform and streamline your keychain assembly with these sleek and easy-to-use clips.

Keychain Thingies® are the ultimate timesavers for keychain making, and XL will work with up to approximately .18" - .19”, including acrylic, wood, leather, and more! They will also work for 1/8” materials, but there will be a small gap/movement. They may not fit thicker materials near a true 1/4”. Please use digital calipers to measure your material.

When creating your keychain files, it's recommended to use a .19" size hole with a .125" offset. Recommended material thickness is 1/8" (or 2.2mm - 3mm).

*** This listing is for 100 clear pieces.

-----------------
DETAILS
-----------------
• Color: Clear
• Quantity: 100 pieces
• Pair with your favorite keychain material, along with Monarch Pine split rings and lobster swivel clasps!
• Perfect to pair with acrylic, wood, leather, and more!

-----------------
DETAILS
-----------------
• Color: Silver
• Material: Brass
• Size: 21x12mm, 2 holes
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with polymer clay, leather, cork, resin, wood, metal, etc.

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) or gold
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is about 0.75" on the longest side 
• Lobster clasp closure plus attached 2 inch extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Matte white
• Material: Acrylic with stainless steel post
• Shape: Circle with connector hole
• Size: 16mm
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

-----------------
DETAILS
-----------------
• Color: Choice of silver or gold 
• Material: Stainless steel (stainless steel color or gold-plated stainless steel, shiny finish)
• Size: Approximately 0.5" wide, 1 hole (connector loop for posts/hooks)
• Quantity: 10 pieces 
• Perfect to pair with polymer clay, leather, cork, resin, wood, metal, etc.

-----------------
DETAILS
-----------------
• Color: Choose gold or silver (stainless steel color)
• Material: Stainless steel
• Size: 6mm wide for both halves together, 12.5mm long (including both holes) 
• Quantity: 5 sets total (2 halves per set)
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Perfect for bracelet and necklace making!

-----------------
DETAILS
-----------------
• Color: Gold/golden
• Material: Surgical stainless steel
• Quantity: 10 pieces
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)

All new 100% stainless steel hardware! The hardware is all stainless steel, including the dome. The posts are 316l surgical stainless steel and feature a wider flat pad base (see the 2nd listing photo for an example of the new post/dome style), which makes these very sturdy and durable. Each pair comes carefully packaged on an earring card in its own cello bag. Bullet clutch backs are included on the earrings, along with an extra free set of backs with each pair.

** Since this is a beaded item, I'll ship these to you in a box. It's highly recommended to ship seed bead earrings to your own customers in a protective box instead of a poly mailer. **

-----------------
DETAILS
-----------------
• Color: Black and white mix 
• Material: Seed beads, 316l surgical stainless steel earring post, stainless steel base (100% stainless steel hardware)
• Shape: Round (pom style)
• Size: 15mm diameter (size small/petite -- wearable and versatile for almost everyone!)
• Quantity: 1 pair
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

Seed bead stud toppers are perfect to pair with team earrings, acrylic, wood, leather, and more! Use them alone, or simply link a jump ring through the hole in the beading dome that lines up with the post. This listing is for 2 individual pieces (1 pair).

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) or gold
• Material: Stainless steel (mirror polished AKA super shiny finish!)
• Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is about 0.75" on the longest side 
• Lobster clasp closure plus attached 2 inch extender
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 necklace total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)
• Engrave/mark 1 side or both for a super-special end product

These premium Monarch Pine Craft Supply jump rings are easier to use and just as durable as ever. Unlike our previous closed-but-unsoldered style, these are pre-opened so you can simply close them securely—saving you time and effort. They’re sturdy, high-quality stainless steel with a shiny steel-color silver finish that’s hypoallergenic for most people, tarnish-resistant, and nonfading. Once closed, they’ll hold tight through everyday wear.

For best results, we recommend closing with two pairs of jewelry pliers or one pair of pliers and a jump ring ring. They’ll coordinate perfectly with our other silver findings, so your pieces have a seamless, professional finish.

-----------------
DETAILS
-----------------
• Color: Silver (shiny steel color)
• Finish: Unplated stainless steel
• Material: Surgical stainless steel
• Size: 7mm (20 gauge)
• Quantity: 100 pieces
• Style: Open (ready to close)
• Hypoallergenic for most people
• Tarnish-resistant, nonfading
• Coordinates with matching Monarch Pine findings (sold separately)
• Great for connecting charms, pendants, clasps, chains, and other jewelry components
• Works beautifully with leather, resin, wood, metal, acrylic, and more

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Walnut (brown)
• Material: Wood stud / surgical stainless steel post
• Shape: Scalloped fan
• Size: 14x16mm
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

-----------------
DETAILS
-----------------
• Color: Silver (stainless steel color) metal bar with a black braided cord
• Material: Stainless steel (mirror polished AKA super shiny finish on front and brushed finish on back) bar
• Size: Approximately 8.25" bracelet diameter 
• Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people)
• Quantity: 1 bracelet total
• Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel)

1 Step Looping Pliers For 24-18g Wire

-----------------
DETAILS
-----------------
1 Step Looper. Create and trim loops in one easy step! Works with dead soft or half hard precious metal wire, craft wire, and copper or brass core wire. Makes a consistent size 1.5mm loop every time. Bends and trims between 24 and 18 gauge wires. Allows beaders to customize the length of eye pins.

-----------------
DETAILS
-----------------
• Color: Pink (gold hardware)
• Material: Alloy
• Size: Petite, 1 hole (connector loop for posts/hooks)
• Quantity: 10 pieces
• Perfect to pair with polymer clay, leather, cork, resin, wood, metal, etc.

Bow stud connectors with loops are a gorgeous addition to festive, holiday earring designs. Pair with metal, acrylic, leather, wood, and more using Monarch Pine Craft Supply jump rings. This listing is for 10 individual pieces (5 pairs).

**Earring backs sold separately at Monarch Pine in a variety of styles, including silicone ear nuts, butterfly backs, and bullet clutch necks.**

-----------------
DETAILS
-----------------
• Color: Linen (ivory/very pale beige)
• Material: Painted alloy bow and loop / surgical stainless steel pin
• Shape: Bowknot with connector loop
• Size: 11mm x 15mm
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with leather, cork, resin, wood, polymer clay, metal, etc.

1-3/8” and 1-5/8”

-----------------
DETAILS
-----------------
- Professional Pliers Perfect for Bending and Forming Bracelets
- Two Cylinder Sizes: 1 3/8 inches and 1 5/8 inches
- Makes Large Curves in Flat Metal Stock
- Foam Grip Comfort Handles
- Makes Medium to Large Size Bracelets

-----------------
DETAILS
-----------------
• Color: Silver
• Material: Brass
• Size: 26x12mm, 3 holes
• Quantity: 10 pieces (5 pairs)
• Perfect to pair with polymer clay, leather, cork, resin, wood, metal, etc.