DualTite® is a double-sided tape meant for use on layered projects, bypassing the mess and time required when using glue.This tape works well with wood, acrylic, leather, and other materials.
Rolls are 60 yards/180 feet long and come in 1”, 3”, 6”, 12” and 24” widths.
Specifications & Information:
DualTite® is intended for indoor use and not for harsh conditions.It is also not waterproof.
Thickness – 0.09mm
The shelf life is at least 1 year from the manufacture date.
Ideal storage conditions would be in regular living conditions.
Manufacturer Temperature Specifications:
Max: 90C/194F
Min: -20C/-4F
Applications Tips:
Make sure materials are clear of any debris before applying DualTite®.
For best application, we recommend using a squeegee to adhere the tape to the back of a sheet of material.It is best to start from the inside of a sheet and push any potential air bubbles to the outside edges of the sheet.
You may need to slightly change your settings to cut through the additional thickness.
Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!
They will work for most 1/8" materials. They areNOTrecommended for1/4" materials, unless you make a hole large enough for the clip to feed through the material.
**Please note: these are slightly different in appearance compared to the OG clear 1/8” Keychain Thingies®! They have two small holes, as shown in the listing photos. Unlike the OGs, the Xtra Strength have a PERMANENT closure (ask me how I know 😂) so if you need a stronger hold - these are the ones you want!
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with aFREEkeychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.
*Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.
Insurance and Priority Shipping upgrades are available.
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
DualTite® is a double-sided tape meant for use on layered projects, bypassing the mess and time required when using glue.This tape works well with wood, acrylic, leather, and other materials.
Sheets are 12"x19" in size.
Specifications & Information:
DualTite® is intended for indoor use and not for harsh conditions.It is also not waterproof.
Thickness – 0.09mm
The shelf life is at least 1 year from the manufacture date.
Ideal storage conditions would be in regular living conditions.
Manufacturer Temperature Specifications:
Max: -20C/-4F
Min: 90C/194F
Applications Tips:
Make sure materials are clear of any debris before applying DualTite®.
For best application, we recommend using a squeegee to adhere the tape to the back of a sheet of material.It is best to start from the inside of a sheet and push any potential air bubbles to the outside edges of the sheet.
You may need to slightly change your settings to cut through the additional thickness.
Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!
They will work for most 1/8" materials. They areNOTrecommended for1/4" materials, unless you make a hole large enough for the clip to feed through the material.
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with aFREEkeychain file! Email Crystal@RileyBlackDesigns.com to claim your file.
*Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.
Insurance and Priority Shipping upgrades are available.
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
MDF sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. Store sheets flat with weight on top to avoid warping.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
This pack consists of a sheet of walnut, cherry, maple, sapele, and baltic birch. All sheets are 1/8" thick except for baltic birch, which is 3mm. B/BB Baltic Birch will be clear on one side and may allow for a football patch on the other side. All sheets are 11.75"x19" in size."
Processing & Shipping
All 12" x 19" packs ship out same or next day
Free shipping is available to Alaska, Hawaii, or any US territories.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.
We use this material in our laser shop every day. We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Processing & Shipping
Ships free on orders $100+
All 12" x 19" sheets ship out same or next day
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
2 Sided Walnut Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry.
MDF sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Processing & Shipping
Ships free on orders $100+
All 12" x 19" sheets ship out same or next day
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. B/BB will be clear on one side and may allow for a football patch on the other side. Store sheets flat with weight on top to avoid warping. We've used this material in all of our machines and our customers have used it in many others.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x19, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!
These will work for materials up to approx .18-19”! They will also work for 1/8” materials, but there will be a small gap/movement. They may not fit thicker materials near a true 1/4”.
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with aFREEkeychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.
**Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.
Insurance and Priority Shipping upgrades are available.
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
*** Please note the area for engraving is very narrow. It's beautiful engraved or worn as-is!
----------------- DETAILS ----------------- • Color: Choose silver (stainless steel color) or gold, rose gold, or black plating • Material: Stainless steel (mirror polished AKA super shiny finish!) • Size: Chain is approximately 17.5 inches long and cross is 11mm wide by 18mm long (each end of the cross is 3.5mm wide by 3.5mm thick) • Lobster clasp closure • Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people) • Quantity: 1 necklace total • Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel) • Engrave/mark 1 side or both for a super-special end product
Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!
They will work for most 1/8" materials. They areNOTrecommended for1/4" materials, but may work for some slightly thicker 1/8” materials. These have two locking mechanisms, so they are a little tougher to close compared to the other styles.
**Please note: these are slightly different in appearance compared to the OG clear 1/8” Keychain Thingies®! They have two small holes, as shown in the listing photos. Unlike the OGs, the Xtra Strength have a PERMANENT closure (ask me how I know 😂) so if you need a stronger hold - these are the ones you want!
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with aFREEkeychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.
*Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.
Insurance and Priority Shipping upgrades are available.
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the basswood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
2 Sided Cherry Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry.
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
1/8" x 11.75" x 19.2" 2 Sided White Birch Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry.
This listing is for a wire keychain cable screw closure - approx 2”.
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these (for cushion around the hole). This listing also comes with aFREEkeychain file! I will email the file to the email on the order at time of shipping.
**Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands. Price includes a FREE keychain file!Insurance and Priority Shipping upgrades are available.**
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
----------------- DETAILS ----------------- • Color: Choose silver (stainless steel color) or gold or rose gold plated • Material: Stainless steel (mirror polished AKA super shiny finish!) • Size: Chain is approximately 18 inches long and bar is roughly 6x35mm (slightly wider and longer than our other solid horizontal bar necklace) • Lobster clasp closure • Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people) • Quantity: 1 necklace total • Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel) • Engrave/mark 1 side or both for a super-special end product
MDF sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. Store sheets flat with weight on top to avoid warping.
Due to increased demand, we have expanded into a variety of sizes. These sizes are intended to be compatible with the following machines: Glowforge, XTool, K40, OMTech, Thunder, Aeon, Boss, AP Laser, Epilog, and Trotec. Please contact us for other size requests.
Processing & Shipping
All prepacks ship free
All 12" x 19" prepacks ship out same or next day
All other size prepacks ship out in 1-3 days
Free shipping is available to Alaska, Hawaii, or any US territories for prepacks in the following sizes: 12x12, 12x16, 12x20, and 12x24.
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
Hate dealing with jump rings for your keychains?! Me too! These clips will save you so much time!! Now available in 25, 50 & 100 quantities!
They will work for most 1/8" materials. They areNOT recommended for 1/4" materials, unless you make a hole large enough for the clip to feed through the material.
When creating your keychain files, I recommend using a .19" size hole, with a .125" offset around it for these. This listing also comes with aFREEkeychain file! Email Crystal@RileyBlackDesigns.com with your order # to claim your file.
**Turnaround time is typically next business day, but up to 2-3 business days for them to leave my hands.
Insurance and Priority Shipping upgrades are available.
Items may contain small blemishes or defects. Product color may slightly vary due to photographic lighting sources or your monitor settings. Counting/weighing errors can occur, but are unlikely. Items are examined for significant defects, but some may be missed. If you receive any defective items, please email me a picture within 4 days of delivery.
----------------- DETAILS ----------------- • Color: Choose silver (stainless steel color) or gold plated • Material: Stainless steel (mirror polished AKA super shiny finish!) • Size: Chain is approximately 17.25 inches long (plus 2 inch extender) and pendant is 25mm on the longest side • Lobster clasp closure plus attached 2 inch extender • Tarnish-resistant, nonfading, and sensitive skin friendly (hypoallergenic for most people) • Quantity: 1 necklace total • Wear as is or engrave with a laser (such as a fiber or infrared laser) or handstamp; please note that CO2 lasers will need a marking spray (refer to settings from your laser manufacturer for engraving/marking stainless steel) • Engrave/mark 1 side or both for a super-special end product
Plywood sheets are about 1/4" smaller on each dimension due to saw blade kerf when cutting. The material has no knots or patches on either side. Store sheets flat with weight on top to avoid warping.
We use this material in our laser shop every day. We have found the wood core cuts much cleaner and faster than an MDF core, allowing us to make more product in a shorter amount of time.
Processing & Shipping
Ships free on orders $100+
All 12" x 19" sheets ship out same or next day
Custom or Bulk Orders Please contact us atcontact@creativecutsupplies.comfor any custom or bulk order requests.
Bunk Shipments We ship full and partial bunks across the country. Contact us at contact@creativecutsupplies.com for any bunk quantities you may need.
1/8" x 11.75" x 19.2" 2 Sided Hickory Material. The wood core allows for consistent cutting and thickness, while reinforcing stability. Our wood panels are supplied with a formaldehyde-free glue and is 100% USA made at our manufacturing facility. We have engineered our wood plywood for the laser engraving industry.
Looking for the best quality, fastest shipping and widest selection of wholesale acrylic sheets? You're in the right spot! We have a wide selection of solid, patterned, pearl, glitter matte acrylic sheets and more with fast shipping!
Choosing a selection results in a full page refresh.
