Fluorescent Green Glitter Flake™ HTV

THICKNESS: 325 microns/.325mm
LASER FRIENDLY: Yes
LAYERABLE: Yes
IRON/HEAT PRESS: Both
CPSIA CERTIFIED: Yes

USE THIS ON: 
⋆ 100% Cotton
⋆ 100% Polyester
⋆ Poly/Cotton Blends
⋆ Leather

HOME IRON INSTRUCTIONS:
⋆ Set iron dial between Cotton and Linen
⋆ Cover with Heat Transfer Cover Sheet or Multipurpose Paper
⋆ Place on flat, hard surface (ironing board not recommended)
⋆ Press iron with medium/firm pressure (do not slide iron)
⋆ Press each section of design for 10-12 seconds
⋆ If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
⋆ Peel carrier hot 

HEAT PRESS INSTRUCTIONS:
⋆ Cover with Heat Transfer Cover Sheet or Multipurpose Paper
⋆ Preheat garment for 2-3 seconds
⋆ Apply design at 302°F/150°C
⋆ Use medium pressure for 10-12 seconds
⋆ Peel carrier hot