Crazy Crystal Lady Ready To Press Design

CMB Ready To Press designs are all printed on either Siser ColorPrint™ HTV or A-SUB® Sublimation Paper using an industrial printer. These prints are great to use alone or as a starting to point to create your own, unique creation! 

Size is measured at the longest OR widest piece, whichever is largest.

---

HTV DESIGNS

THICKNESS: 80 Microns/5.3 Mils
LASER FRIENDLY: Yes
LAYERABLE: Yes
IRON/HEAT PRESS: Both
CPSIA CERTIFIED: Yes
CARRIER: Attached

USE THIS ON: 
⋆ 100% Cotton
⋆ 100% Polyester
⋆ Poly/Cotton Blends
⋆ Leather

HOME IRON INSTRUCTIONS:
⋆ Set iron dial between Cotton and Linen
⋆ Cover with Heat Transfer Cover Sheet or Multipurpose Paper
⋆ Place on flat, hard surface (ironing board not recommended)
⋆ Press iron with medium/firm pressure (do not slide iron)
⋆ Press each section of design for 10-15 seconds
⋆ If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
⋆ Peel carrier warm

HEAT PRESS INSTRUCTIONS:
⋆ Cover with Heat Transfer Cover Sheet or Multipurpose Paper
⋆ Preheat garment for 2-3 seconds
⋆ Apply design at 300°F/149°C
⋆ Use medium pressure for 15 seconds
⋆ Peel carrier hot or cold

---

Sublimation Paper

THICKNESS: 80 Microns/5.3 Mils
LASER FRIENDLY: No
LAYERABLE: Yes (Requires different instructions to prevent bleeding or unwanted transfer)
IRON/HEAT PRESS: Heat Press Recommended
CPSIA CERTIFIED: Yes

USE THIS ON: 
⋆ 100% Polyester

HEAT PRESS INSTRUCTIONS:
⋆ Cover with Heat Transfer Cover Sheet or Multipurpose Paper (Use this or copy paper in between layers of fabric when pressing shirts, pillowcases, or anything else with a front and back later like this to prevent bleed through)
⋆ Preheat garment for 2-3 seconds
⋆ Apply design at 400°F/207°C
⋆ Use medium to firm pressure for 60 seconds
⋆ Peel transfer hot