These are just suggestions- we ALWAYS recommend test cuts to find the perfect setting for your machine and personal preferences


 1/8" Opaque, Semi-Opaque, & Transparent Colors: PG Medium and coordinating color. For example, red colors would be PG Medium Red

 1/4" Solids: PG Thick & Coordinating color

1/8" Mirror: All of our mirrored acrylic can be cut on PG Medium, selecting either Red (warmer colors) or Blue (cooler colors) to match the color you are cutting. Generally mirrored acrylic is engraved mirror side down with a mirrored image.

 1/8" Specialty: Most of our specialty acrylic sheets can be cut using PG Medium White or Black. For glitters and darker colors we recommend black. For lighter colors and lines like our marble pearl, we recommend starting with PG Medium White. Again- Test cut! 

5/32" Chunky Party Line: PG medium black with 2 passes. These are not suited for super detailed cuts. 

1/8" Pattern Sheets: Cut on PG Medium, selecting either Draft board, Clear, Black, or White to match the base you are cutting.

GLOWFORGE Tips & Tricks ★
-Always run a test cut! One thing we find often is that despite similar setups and machines, cut settings can vary drastically. While we have done plenty of testing and work with best practices, all of our suggestions are starting points. 
-Our Acrylic comes masked with paper or plastic, and varies by manufacturer. We recommend removing the masking on those with plastic masking and replacing with your own favorite masking.